TM 5-3610-252-14
2-16.5 Replace Piston Sleeve Wiper Seals.
MOS:
83FJ6, Reproduction Equipment Repairer
TOOLS: External Snap Ring Pliers
Seal Driver (1-1/8 in. OD)
Ball Peen Hammer 4 oz.
Two Flat Tip Screwdrivers
2-3/4 in. Wrench
Drift Punch (1/8 in.)
6 mm Hex Head Key Wrench
1-1/2 in. Combination Wrench
SUPPLIES: HDO-30 Oil (Item 10, Appendix E)
Grease, Wide Temp Range (Item 7, Appendix E)
Cheesecloth (Item 4, Appendix E)
Wiper Seals
a.
Use flat tip screwdriver to lift up activator. Remove connector from
groove with second screwdriver.
b. Remove three bolts, washers, and handle.
c.
Pull yoke forward and remove handle with chain.
d. Drive out split pin from left side of handle yoke.
2-28
Change 1
