TM 5-3610-252-14
2-16.3 Repair Control Valve.
MOS:
83FJ6, Reproducti on Equipment Repairer
TOOLS: 9/16 in. Combination Wrench
15/16 in. Combination Wrench
SUPPLIES:
HDO-30 Oil (Item 10, Appendix E)
Cheesecloth (Item 4, Appendix E)
Hydraulic Fluid (Item 6, Appendix E)
a.
Unscrew valve body.
b. Remove copper seal, brake spring, O-ring, and plunger from valve body.
c.
Remove valve cap, copper seal, spring, spring guide, and ball.
d. Wipe all parts clean with lightly oiled cheesecloth.
e.
From nut side of valve body, install ball, spring guide, spring, copper
seal, and valve cap.
NOTE
Make sure copper seal is seated and valve cap
leaks.
f. Place large copper seal onto valve body.
is tight to prevent fluid
2-24
