TM 5-2330-305-14
4.4.1.25 REPLACE AIR HOSES.
TOOLS: Combination Wrench Set
SUPPLIES: Hoses
Liquid Detergent
Plastic Pail
1. Depressurize air system by opening ejector.
2. Loosen
3. Remove
4.
Remove
Male pipe end of air hose does not
swivel. To remove the male end of
an air hose fram a component, dis-
connect the swivel at the other end
of the air line. Then disconnect
the air line from the chassis so
that the male pipe end turns freely.
connectors and remove hose.
hose tag by prying apart enough to slip over connector.
retaining clips and hose from chassis.
5.
Install new hose to chassis and retain with clips.
4-48
