TM 5-2330-305-14
3. Remove two nuts, two bolts and cross support brace.
4. Remove two nuts and two bolts which secure diagonal support braces
to landing gear.
5. Remove four nuts and four bolts which secure longitudinal support
braces to leg assemblies.
SUPPORT THE LANDING GEAR PROPER-
LY TO PREVENT IT FROM FALLING.
6. Extend landing gear just enough to support its own weight so it
will not fall when mounting bolts are removed.
7. Remove two bolts which connect the cross shaft to the two leg
assemblies.
8. Remove the six bolts which secure the right leg assembly to the
chassis and remove the leg assembly.
9. Remove the six bolts which secure the left leg assembly to the
chassis and remove the leg assembly.
10. Place new left leg assembly imposition and secure to chassis with
six bolts.
11. Place new right leg assembly imposition and secure to chassis with
six bolts.
12. Reinstall cross-shaft and secure to the two leg assemlies with two
bolts.
13. Reinstall four bolts and nuts which secure longitudinal support
braces to leg assemblies.
14. Reinstall two bolts and nuts which secure diagonal support braces
to landing gear.
15. Reinstall cross support brace and secure to landing gear with two
bolts and nuts.
4 - 27
