TM 5-2330-305-14
4. Install new hand valve and retain with bolts, nuts and washers.
5. Reinstall air hoses and exhaust hose in proper reassembly order to
valve and tighten fittings securely.
6. Check for air leaks by applying a soapy water solution to fittings
and inspecting for bubbles.
4.4.1.9 REPLACE GAGE
TOOLS: Combination Wench Set
SUPPLIES: Air Gage
Thread Sealer (TFL)
Solvent
Cotton Cloth
1. Depressurize system by opening moisture ejectors.
2. Loosen fittings and remove two air hoses and exhaust hose.
3. Remove two bolts, nuts and washers retaining gage to frame. Remove
gage.
4. Remove two elbow fittings from gage and clean with solvent-
saturated, cotton cloth.
4 - 24
