TM 5-2330-305-14
NOTE
Replacement license plate lights do
not have a plug connector. Mounting
holes will have to be drilled out to
match machined holes in frame.
5. Clip plug from old light and splice to replacement light, or attach
new plug to replacement light.
6. Wrap with tape.
7. Push plug through hole in chassis.
8. Connect plug and receptacle.
9. Wrap with tape.
10. Attach light assenbly to frame with two machine screws.
3.3.1.2 REPLACE CLEARANCE, MARKER, AND IDENTIFICATION LIGHTS.
TOOLS: Flat-Tipped Screwdriver
SUPPLIES: Light
1. Remove lens by removing two sheet metal screws.
2. Remove light assembly from frame by removing two machine screws.
3-3
