TM 5-2330-305-14
Section III. MAINTENANCE PROCEDURES
3.3.1 MAINTENANCE PROCEDURES This section contains the step-by-step procedures
for performing Operartor’s maintenance for the Chassis, Semitrailer. Personnel
required are listed only if the task requires more than one. If personnel are not
listed, it means one person can do the task.
INDEX
PROCEDURE
PARAGRAPH
Replace License Plate Light . . . . . . . . . . . . . . . . . . . . . . 3.3.1.1
Replace Clearance, Marker, and Identification Lights . . . . . . . . . 3.3.1.2
Replace Stoplights, Turn Signals, and Tall Lights . . . . . . . . . . . 3.3.1.3
3.3.1.1 REPLACE LICENSE PLATE LIGHT.
TOOLS: Flat-Tipped Screwdriver
SUPPLIES: Light
1. Remove from frame by removing two machine screws.
2. Unwrap tape and locate connections.
3. Disconnect plug from receptacle.
4. Remove light assembly.
3 - 2
