TM 5-2330-305-14
Section Il. OPERATOR’S PREVENTATIVE MAINTENANCE CHECKS AND SERVICES
2.2.1 INTRODUCTION
a. Always keep in mind the WARNINGS and CAUTIONS when performing PMCS. Table
2-1 lists the PMCS procedures to be performed by the operator. Be sure to
perform the PMCS at the frequency indicated by the INTERVAL codes in the
table.
b.
If your equipment fails to operate, troubleshoot with the proper equipment.
Report any deficiencies in accordance with TM 38-750.
NOTE
If the equipment must be kept in continuous operation, check
and service only those items that can safely-be checked and
serviced without disturbing operation. Make the complete
checks and services when the equipment can be shut down.
c. The numbers found in the ITEM NUMBER column shall be used as a source of item
numbers for the TM NUMBER column on DA Form 2404, Equipment Inspection and
Maintenance Worksheet, in recording the results of PMCS.
d. List of tools and materials required for PMCS is as follows:
Item
Quantity
Liquid Detergent
ar
Sponge
1 ea
Plastic Pail
1 ea
Tire Pressure Gage
1 ea
2-6
