TB 1-4920-443-35
AEDATS IV T53/T55/T63 ALIGNMENT WORKSHEET
(12)Engine oil inlet temperature gauge T53/T55 (Decade Box)
(Refer to page 70 step 56)
(a) Connect the decade resistor to pins N and P of the flight harness cable connector (T53), or pins K
and N of the flight harness cable connector (T55). Adjust the decade resistor to obtain the gauge
indications listed below.
Decade Resistor
Reading
Avg
AEDATS 4
(Ohms)
(ORBT)
+/-2 F
90.34-90.42
____________
32F
90.4
97.27-97.35
____________
68F
97.3
104.56-104.64
____________
104F
104.6
111.78-112.78
____________
140F
112.3
119.86-120.86
____________
176F
120.4
128.35-129.35
____________
212F
128.8
141.80-143.00
____________
266F
142.4
151.31-152.51
____________
302F
151.9
176.95-178.95
____________
392F
177.9
Transducer: T87
Hardware Name: LL04
(a) MT-10 0-1000 psig fuel manifold Pressure (T53/T55/L714 Only)
1 Using the pressure calibrator, apply the following pressures to MT-10, and record the results.
Vertical Scale top row 10
5SE01313-9
AEDATS 4
Actual
AEDATS 4
6SE00950-7
Pressure
Vertical Scale Channel name
Pressure
(*)
(psig)
(*)
psi
+/- 2 psi
+/- 2 psi
T53 pmfd
Vent
____________
____________
____________
T55 pfcd
200
____________
____________
____________
L714 pfpo
400
____________
____________
____________
600
____________
____________
____________
800
____________
____________
____________
1000
____________
____________
____________
R-cal
____________
Transducer: T31
Hardware Name: HL10
181
