TM 9-4931-436-14&P
Definition
Code
Definition
Code
Item to be assembled at organi-
or additional initial issues
AO
zational level.
or outfittings. Not subject
Item to be assembled at direct
AF
to automatic replenishment.
support maintenance level.
Support equipment procured and
PE
Item to be assembled at general
stocked for initial issue or
AH
support maintenance level.
outfitting to specified
Item to be assembled at depot
maintenance repair activities.
AD
maintenance level.
Support equipment which will
PF
Item is not procured or stocked
not be stocked but which will
XA
because the requirements for
be centrally procured on
the item will result in the
demand.
replacement of the next
Item procured and stocked to
PG
higher assembly.
provide for sustained support
Item is not procured or stocked.
for the life of the equip-
XB
If not available through sal-
ment. It is applied to an
vage, requisition.
item peculiar to the equip-
Installation drawing, diagram,
ment which, because of prob-
XC
instruction sheet, field ser-
able discontinuance or shut
vice drawing, that is identi-
down of production facilities,
fied by manufacturer's part
would prove uneconomical to
number.
reproduce at a later time.
A support item that is not
An item of depot overhaul/
XD
KD
stocked. When required, item
repair kit and not purchased
will be procured through nor-
separately. Depot kit de-
mal supply channels.
fined as a kit that provides
items required at the time of
overhaul or repair.
NOTE
An item of a maintenance kit
KF
Cannibalization of salvage may
and not purchased separately.
be used as a source of supply
Maintenance kit defined as a
for any items coded above ex-
kit that provides an item
cept those coded XA and aircraft
that can be replaced at or-
support items as restricted by
ganizational or intermediate
AR 700-42.
levels of maintenance.
Item included in both a depot
KB
(2) Maintenance Code. Maintenance
overhaul/repair kit and a
codes are assigned to indicate the levels
maintenance kit.
Item to be manufactured or
of maintenance authorized to USE and
MO
REPAIR support items. The maintenance
fabricated at organizational
codes are entered in the third and
level.
fourth positions of the Uniform SMR
Item to be manufactured or
MF
Code format as follows:
fabricated in the direct sup-
(a) The maintenance code entered
port maintenance level.
Item to be manufactured or
in the third position will indicate the
MH
fabricated at the general
lowest maintenance level authorized to
support maintenance level.
remove, replace, and use the support
item. The maintenance code entered in
Item to be manufactured or
MD
the third position will indicate one of
fabricated at the depot
the following levels of maintenance.
maintenance level.
C-3
