ARMY TM 9-1290-262-24&P
MARINE CORPS TM 00476C-24&P
AIR FORCE TO 49A7-3-72/74
NOTES
1. FABRICATE FROM MILD STEEL.
2. ALL DIMENSIONS ARE IN INCHES WITH METRIC CONVERSION TO MILLIMETERS IN
PARENTHESES.
3. DIMENSION TOLERANCES:
DECIMALS 0.005
FRACTIONS 1/64
4. GRIND TOP PLATE PARALLEL TO BASE PLATE AFTER ASSEMBLY.
5. USE 0.010 SHIM FOR CLEARANCE BETWEEN SCREW AND TOP PLATE WHEN TIGHTENING
SETSCREW IN KNOB. THEN DRILL HOLE THROUGH KNOB AND SCREW SHAFT FOR 1/16-
IN. DIA X 1/2-lN. LONG SPRING PIN. INSTALL SPRING PIN.
6. GRIND TO AID IN ASSEMBLY.
