MORE
ON
SETTING
UP
YOUR
M2
OR...
MORE ON LEVELING THE AIMING CIRCLE
NOTE
In the following step the circular level bubble must also remain centered.
7 Check elbow telescope tube level bubble.
Aiming circle must be in the level position.
Turn elevation knob to set elevation scale to zero. The elevation
micrometer scale must also read zero.
The elbow telescope tube level bubble should be centered.
you need light to set up and use the aiming circle:
Uncoil the bracket light wire and slip the bracket light dovetail into
the slot on the elbow telescope.
Uncoil the hand light wire if you need the hand light.
Turn rheostat knob to ON. The hand light will remain at full bright-
ness. Turn rheostat knob to decrease brightness of the bracket
light lamp.
46
