TM 5-6675-331-14&P
2-4.
PREPARATION FOR USE. (Cont'd)
g.
Removing and setting up ladder.
(1)
Remove retaining clip (1) from pin (2) to remove ladder (3) from shelter (4).
(2)
Remove retaining clips (5) and pins (6) from brackets (7).
(3)
Position ladder (3) in brackets (7) below shelter door.
NOTE
Ladder must be positioned so that steps are level. If ladder is reversed, steps are incorrectly positioned,
and bottom of ladder does not properly contact ground.
(4)
Install pins (5) through inside of ladder brackets (7) and ladder (3).
(5)
Install retaining clips (6) through pins (5).
2-31
