TM 5-6675-328-14
(2)
Prepare liquid to be sprayed according to instructions on container. Fill sprayer jar not more that 3/4 full.
(3)
Attach blower hose to exhaust end of blower and attach the adapter and sprayer to the other end of the
hose.
NOTE
Thick liquids will take a few seconds to start spraying.
(4)
Turn on blower and point sprayer to a waste area for testing. To spray, cover hole at top with finger; to
stop spraying, remove finger from hole.
(5)
For light liquids, turn sprayhead in direction reading "LESS". For heavier liquids, turn in direction reading
"MORE".
(6)
Regulate spray pattern by turning the fan adjustment on the sprayhead.
(7)
Immediately after using sprayer for painting, clean jar and spray gun thoroughly. To dismantle adjustable
spray control nozzle, twist nozzle to left, pull off, and clean by running cleaner through all openings. Reinstall nozzle.
10-6.5 Tripod.
Set up and operate tripod in accordance with TM 5-6675-306-14.
10-6.6
Preparation for Movement. Check that all equipment is properly stored in their respective containers and/or
securely held with tiedowns. Those items that are not secured by tiedowns will be stored in drawers or lockers.
10-22
