TM 5.6675-328-14
9-16.13. Remove/Install Bench Top Storage Cabinet.
MOS:
41B, Topographic Instrument Repair Specialist or 83FJ6, Reproduction Equipment Repairer
TOOLS:
1/2 in. Socket, 1/2 in. Drive
1/2 in. Drive Ratchet
Cross Tip Screwdriver
SUPPLIES:
Storage Cabinet
a.
Remove drill press (paragraph 3-16.5).
b.
Remove grinder/dust control assembly (paragraph 4-16.1 and 4-16.2).
c.
Remove screws securing bench top and remove bench top. Retain bench top for use on new cabinet.
d.
Remove bolts, flat washers, and lockwashers holding cabinet to wall.
e.
Remove lag bolts holding cabinet to floor and remove cabinet.
f.
Place new cabinet in position and install but do not tighten lag bolts.
g.
Install bench top and secure with screws.
h.
Secure cabinet to wall with bolts, flat washers, and lockwashers.
i.
Tighten lag bolts securing cabinet to floor.
j.
Install grinder/dust control assembly (paragraph 4-16.1 and 4-16.2).
k.
Install drill press (paragraph 3-16.5).
9-20
