TM 5-6675-328-14
9-16.12. Remove/Install Four-Shelf Storage Cabinet.
MOS:
41B, Topographic Instrument Repair Specialist or 83FJ6, Reproduction Equipment Repairer
TOOLS:
1/4 in. Drive Socket Set
1/4 in. Drive Socket Extension, 6 in. Long
11/32 in. Combination Wrench
Flat Tip Screwdriver
Cross Tip Screwdriver
Mechanical Fingers
SUPPLIES:
Four-Shelf Storage Cabinet
a.
Remove bolts, lockwashers, and flat washers holding cabinet to wall.
b.
Remove caps; remove lag bolts holding mounting brackets to floor and emove cabinet.
c.
Remove bolts, nuts, and lockwashers; remove mounting brackets and spacers from cabinet. Retain mounting
brackets and spacers for use on new cabinet.
d.
Position spacers and mounting brackets on new cabinet and install but do not tighten bolts, nuts, and
lockwashers.
e.
Place new cabinet in position and install but do not tighten lag bolts.
f.
Secure cabinet to wall with bolts, lockwashers, and flat washers.
g.
Tighten the mounting bracket and spacer retaining bolts and nuts.
h.
Tighten the lag bolts holding the mounting bracket to the floor and install the caps.
9-19
