TM 5-6675-328-14
SECTION III OPERATOR MAINTENANCE
3-8. LUBRICATION INSTRUCTIONS. Use lubricating oil (Item 10, Appendix E) and lubricate the drill press after each
use as follows:
NOTE
The following lubrication instructions are mandatory.
a. Lubricate the column and table. Wipe off excess oil with clean cloth.
b. Raise table to maximum height and lubricate the rack, feed wheel shaft, and pinion gear of the feed assembly.
c. Lubricate the threads and shaft of motor locking wheel.
3-9. TROUBLESHOOTING PROCEDURES. There are no operator troubleshooting procedures assigned for this
equipment.
3-10. MAINTENANCE PROCEDURES. There are no operator maintenance procedures assigned for this equipment.
3-10