TM 5-6675-328-14
2-16. MAINTENANCE PROCEDURES. There are no organizational maintenance procedures assigned for this
equipment.
2-17. PREPARATION FOR STORAGE OR SHIPMENT.
a.
Before removal of equipment for storage, the following components are to be removed and stored in their
shipping containers:
(1)
Ultradex
(2)
Four alinement telescopes
(3)
Stellite mirrors
(4)
Optical leveling mirror
(5)
Stride level
(6)
Adjustable mounting base
(7)
Optical plummet control handle
(8)
Box level
b.
Check that test post is in lowered position.
c.
Check that all power cords and lighting unit cords are stored.
SECTION V DIRECT/GENERAL SUPPORT MAINTENANCE
2-18. REPAIR PARTS; SPECIAL TOOLS; TEST, MEASUREMENT, AND DIAGNOSTIC EQUIPMENT; AND
SUPPORT EQUIPMENT.
2-18.1 Common Tools and Equipment. For authorized common tools and equipment, refer to the Modified Table of
Organization and Equipment (MTOE) applicable to your unit.
2-18.2 Special Tools; Test, Measurement, and Diagnostic Equipment; and Support Equipment. Special tools, TMDE
and Support Equipment is listed in the applicable repair parts and special tools list in Appendix B of this manual.
2-18.3 Repair Parts. Repair parts are listed and illustrated in the Repair Parts and Special Tools List, TM 5-6675-328-
24P covering direct/general support maintenance for this equipment.
2-19. DIRECT/GENERAL SUPPORT TROUBLESHOOTING PROCEDURES.
a.
Direct/general support troubleshooting procedures cover the most common malfunctions that may be repaired at
the direct/general support level. Repair or adjustment requiring specialized equipment is not authorized unless such
equipment is available. Troubleshooting procedures used at lower levels should be conducted in addition to the
direct/general support troubleshooting procedures.
2-64
