TM 5-6675-328-14
MULTIPLE TARGET COLLIMATOR (MTC)
(13)
Rotate MTC until the focusing lens adjustment screw slot that is in line with the reticle adjustment screw slots is
on top.
(14)
Place AS-1 in V-blocks of mounting base on test post, and mount so that AS-1 is looking into MTC.
(15)
Attach separate auxiliary lighting unit to AS-1 and power supply, and turn on light.
(16)
Adjust eyepiece of AS-1 telescope until reticle becomes sharp.
(17)
Use a stellite mirror to focus the AS-1 to infinity by placing the mirror against objective end and autocollimating
off mirror. If reflected image is not in clear focus, adjust focusing knob until image becomes sharp.
(18)
Disconnect auxiliary lighting unit from AS-1, connect to MTC.
2-29
