TM 5-6675-326-14
2-19.9 Replace Transformers T1 and T2
PERSONNEL REQUIRED: 1 Topographic instrument repair specialist MOS 41B
1 Terrain analyst MOS 81Q
TOOLS: 9/64-in. flat-tip screwdriver
Soldering gun
MATERIALS/PARTS: Solder, item 19, appendix E
Transformers T1 and T2.
REMOVAL:
WARNING
ELECTRICAL SHOCK
Unplug power cord before servicing the split-stage light table. Failure to do so
may result in death or serious injury.
NOTE
The same procedure is used to replace transformers T1 and T2.
a. Turn power OFF, and unplug power cord.
b. Loosen two screws, and remove front cover.
2-66 Change 1