TM 5-6675-325-14
f.
Turn main circuit breaker off.
g.
Turn safety switch off.
h. Have power cable disconnected at power supply end. Then disconnect power
cable from receptacle.
Put cable in storage box on trailer chassis.
i.
Turn emergency light switch off.
j.
Disconnect telephone cables from power entry panel.
CAUTION
To prevent loss of rod or thread damage, do not allow ground rod to
rotate and unscrew when removing the slide hammer rod.
k. Remove ground rod with slide hammer, and put ground rods, couplings,
and slide hammer inside section.
Clean threads on each ground
storing.
Be certain exhaust fan and
l.
Reinspect section interior for
m.
Close section.
Secure and lock
NOTE
air vent doors are secure
rod before
ly closed.
all vents.
loose equipment and close
all personnel doors and cargo door.
NOTE
Be sure air conditioner/heater covers are down and secured.
n.
Remove
o.
Remove
p.
Secure
handrails from boarding ladders.
boarding ladders and insert handrails into back of ladders.
ladders to back of section.
q.
Fully extend landing gear.
r.
Retract leveling jacks.
s.
Visually inspect section exterior to be sure al
secured.
equipment and covers are
1-36
