TM 5-6675-325-14
WARNING
To prevent death or serious injury, do not handle or clean power cable or
connectors when cable is connected to power source.
NOTE
The section must be properly grounded before power is connected. If it is
not possible to drive the three sections of ground rod fully into ground,
the rods may each be driven into the wound separately and connected in
series.
If it is impossible to drive-a ground rod, a-suitable alternative
ground must be found, such as a buried metal water pipe.
Grounding Techniques for additional instructions.
(11) Connect ground cable to ground lug with wing nut.
CAUTION
Be sure safety switch is off before connecting power cable to avoid
equipment damage.
(12) Firmly connect the power cable to the power receptacle.
1-32
