TM 5-6675-325-14
(10) Key in C value (computed with known length of object in photograph being
measured).
(11) Set auto-scaler X MEMORY switch to 2.
(12) Trace boundary
reach starting point.
Following are tables
cards.
The tables can be used to verify programs or to program the
calculator if preprogrammed cards are damaged or lost.
line of shape using lens tracing assembly. Stop when you
to activate PRINT command and freeze count.
NOTE
providing information found on preprogrammed magnetic
Table 5-2. PRERECORDED PROGRAM SUBROUTINES (PROGRAMS I,II, III, AND IV)
Label
Key
Routine
Function and Usage Notes
Point Counts
PROGRAM I
Used to total point
counts and multiply total
by constant. Must be
reinitiated if different
count is to be used.
Lengths
Areas
Slope Area
ACCU +
Used to measure lengths
with linear measuring
probe or planimeter.
Must be reinitiated if
scales are changed.
Computes area of mea-
surement.
Prints area
in square feet. Must be
reinitiated if tracer arm
length is changed.
Computes area of slope.
Must be reinitiated if
new slope ratios or
scales are to be used.
Addition routine for
adding slopes or areas.
5-87
