TM 5-6675-325-14
(2) As the main viewing mirror assembly moves from “home” to the full forward
position, the paper drive actuates.
The drive rollers pull paper from the stock .
roll and feed it down into exposure position on the printing easel. With the print
length switch in the SHORT PRINT position, the paper drive stops when paper reaches
the upper optical sensor, and lower optical sensor with the print length switch in
the LONG PRINT position. When main viewing
position, the mirror drive motor stops and
microfiche image onto printing paper.
The
drive motor starts as the exposure lamp SWi
assembly swings back toward the “home” posi
exposure lamp is on.
mirror assembly reaches the full forward
the exposure lamp switches on to project
printing process complete, the mirror
tches off, and the main viewing mirror
tion.
In the “home” position, the
(3) The cutter blade is actuated by a cam driven off the end of the mirror
actuating shaft.
The blade operates as the main viewing mirror assembly reaches the
“home” position. This action cuts the paper at the length previously set by the
optical sensor.
3-7
