TM 5-6675-324-14
i.
Remove separation belt assembly and E-ring.
Push shaft inward until it clears side plate; then remove it along
j.
with the roller.
k.
Remove defective roller(s) from the shaft.
l.
Install new roller(s) on the shaft.
Reinstall shaft.
m.
n.
Reinstall separation belt assembly and E-ring.
o.
Reinstall E-ring, sprocket, and grip ring.
Reinstall PC panel.
p.
Lower and latch upper assembly and return platen to home position.
q.
Reinstall upper and lower rear panels and lower front panel.
r.
s.
Plug in power cord.
t.
Turn power switch to 1 (ON).
3-267
