TM 5-6675-324-14
c.
Tag and disconnect wire from defective detector.
d.
Install new detector, connect wires and remove tags.
e.
Reinstall rowel.
f.
Reinstall cleaner assembly.
Reinstall waste developer receptacle.
g.
h.
Remove paper from bottom of copier.
i.
Reinstall blade lever, lift and place in groove in drum shaft.
Using both hands, gently lower and latch upper assembly.
j.
k.
Reconnect J55 and attach lead wire holder.
1.
Reinstall ozone filter.
m.
Reinstall top left cover.
n.
Return platen to home position.
o.
Close front door.
Plug in power cord.
p.
q.
Turn power switch to 1 (ON).
3-20.52 Replace C leaner Overflow Bulb.
MOS:
35E, Special Electronic Devices Repairer
TOOLS: No. 2 Cross Tip Screwdriver (3 in.)
SUPPLIES: Bulb
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
3-258