TM 5-6675-324-14
Table 3-7. PRESCAN CORONA HEIGHT
Applied
Tolerance
Standard
Voltage
Position
2 mm
-5.1 kV
NOTE
To adjust the height of the corona wire, turn screw located on the side
of the corona.
d. Adjust height of corona.
e.
Check that corona wire is free of kinks, bends, or peeled plating.
f. Clean corona with cheesecloth moistened with alcohol.
Reinstall corona assembly.
g.
h. Close front door.
Turn power switch to 1 (ON).
i.
3-20.43 Replace Prescan Corona.
35E, Special Electronic Devices Repairer
MOS:
SUPPLIES: Cheesecloth (Item 7, Appendix E)
Prescan Corona
a. Turn power switch to O (OFF).
3-235
