TM 5-6675-324-14
d. Adjust height of corona wire by turning screw located on back or
side of corona. One complete turn adjusts height by 1 mm (0.04 in.).
Check that corona wire is free of kinks, bends, or peeled plating.
e.
f. Wipe corona wire with cheesecloth moistened with alcohol.
Reinstall corona.
g.
Close front door.
h.
Turn power switch to 1 (ON).
i.
3-20.41 Replace Primary Corona.
35E, Special Electronic Devices Repairer
MOS:
Cheesecloth (Item 7, Appendix E)
SUPPLIES:
Primary Corona
Turn power switch to O (OFF).
a.
b. Open front door.
c.
Pull out primary corona and discard.
3-232
