TM 5-6675-324-14
Reinstall the bottom roller, clevis pins, and springs.
y.
z.
Adjust left and right hex nuts until strips of paper cannot be pulled
through rollers without causing rollers to turn.
aa.
Reinstall locknuts.
ab.
Close paper discharge unit.
ac.
Clean and reinstall paper guide.
ad.
Reinstall fixing assembly in copier, and secure attaching screws.
ae.
Reconnect all wiring to rear of fixing assembly and remove tags.
NOTE
After completion of this procedure, the nip width adjustment (paragraph
3-20.35) must be accomplished.
3-225
