TM 5-6675-324-14
CAUTION
Wrap new roller with copy paper to prevent contaminating roller surface.
Carefully install new top roller into bushing at rear.
q.
r.
Reinstall top roller mounting plate, and top roller gear.
NOTE
Be sure thermistor surface contacts the top roller surface uniformly.
s.
Reinstall thermistor mounting plate and thermistor.
NOTE
The thermal fuse must be mounted 4.5 0.5 mm (0.18 0.02 in.)
from the top roller.
Reinstall thermal fuse and top roller cleaning blade assembly.
t.
NOTE
Be sure top roller gear is not installed backward.
u.
Reinstall top roller gear and secure with grip ring,
NOTE
Clean dirt and fingerprints from heater to prolong heater life.
v.
Reinstall heater, mounting plate, and heater terminal.
w.
Remove bearings and lifting arms from old bottom roller.
Install bearing and lifting arms on new bottom roller.
x.
3-224
