TM 5-6675-324-14
Table 3-5. DIRECT/GENERAL SUPPORT TROUBLESHOOTING - Cont
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
23. PAPER IS NOT ACCEPTED FROM MANUAL FEED GUIDE.
Dc controller PC board is defective.
24. PLATEN RAIL DOES NOT MOVE FORWARD.
Copyboard does not move smoothly when pushed by hand. Check copy-
Step 1.
board glass and clearance of front rail.
Slack in platen drive wire.
Step 2.
Reed switch RS4 is defective.
Step 3.
No input to platen clutch.
Step 4.
Replace connector.
No input to dc controller PC board.
Step 5.
Replace connector.
Input to dc controller, but no output.
Step 6.
25. PLATEN DOES NOT REVERSE.
No clearance between platen rail and glass.
Step 1.
Slack in platen drive wire.
Step 2.
3-118