TM 5-6675-324-14
CAUTION
Glass surface must be handled with care to avoid chipping or breaking.
d.
Remove glass surface and set aside.
Remove screws and back cover panel.
e.
f.
Remove screws and defective ballast transformer.
Disconnect and tag wires from ballast transformer.
g.
h.
i.
Reinstall back cover panel and secure with screws.
j.
k.
Reinstall glass surface.
1.
Turn clips 90 to secure glass surface.
Reinstall screws on clips. Tighten all screws.
m.
n.
Plug in power cord, and turn power switch ON.
2-23