TM 5-6675-323-14
NOTE
Alinement of fiducial marks and principal points is easier if binocular
assembly is tilted back and photographs are viewed through lens-prism
system.
i.
Check that right and left photographs are not interchanged.
j . Determine that principal point in each photograph is visible in other
photographs.
k. Adjust photographs to a common base line.
l . Adjust stereoscope base line parallel to photograph base line with
proper separation.
Replace mirror covers when finished.
m.
NOTE
If stereoscope is not to be used immediately, replace stereoscope in case.
tion only in a controlled environment.
OPERATOR MAINTENANCE
Section III
L U B R I C A T I O N I N S T R U C T I O N S . This equipment does not require lubrication.
There are no operator troubleshooting proce-
dures assigned for this equipment.
a . This section contains instructions covering operator maintenance functions
Personnel required are listed only if the
for the lens-prism-mirror stereoscope.
task requires more than one.
b . After completing each maintenance procedure, perform operational check to be
sure that equ ipment is-properly functioning.
INDEX
PARAGRAPH
PROCEDURES
11-10.1
Adjust Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
