TM 5-6675-323-14
8-6.1 Assembly and Preparation for Use.
Remove zoom transfer scope from transport case.
a.
b. Set zoom transfer scope on flat work surface.
c.
Attach glass stage:
(1) Remove stage lock knobs, bolts, and washers from crosspiece assembly.
(2) Position stage upright with arms facing toward rear.
(3) Thread bolts with plastic washers through stage arms and crosspiece
assembly.
(4) Place metal washer and knob on threaded end of bolt. Tighten knob.
(5) Observe index (focusing) scale on front of upright, and aline prefocused
m a r k or common mark on each upright with top of crosspiece.
( 6 ) P l a c e d i f f u s e r hold-down plate on glass stage.
d.
Attach
above-stage
illuminators.
8-12
