TM 5-6675-323-14
SHORT LOOP TAKE-UP
(2) Short loop take-up threading.
NOTE
After film is threaded conventionally, the following steps will provide
a short loop take-up.
(a) Push stage separation knob down and to the left. Make sure that
view stages separate.
(b) Loosen drag brake knobs on r e e l b r a c k e t s .
(c) Start short film loop.
(d) Insert center accumulator roller over film between view stages.
Pinch spring-loaded latches and latch into position.
(e) Adjust drag brake tension on reel brackets until film tension is
suitable for operator's use.
(3) Long loop take-up threading.
6-29
