TM 5-6675-323-14
f.
Remove screw and lift top assembly from bearing surface. Spray bearings and
track of microscan turntable with silicone spray (Item 27, Appendix E).
Wipe excess silicone spray up with clean cheesecloth.
g.
h.
L o w e r top assembly on bearings and secure with screw.
i.
Reinstall microscan and plug in power cord.
Lower platform to stored position and screw locking screw in.
j.
k. Wipe tracks and mechanism with cheesecloth to remove old grease.
P l a c e GAA grease (Item 11, Appendix E) on clean cheesecloth and rub tracks
l.
and mechanism.
Wipe grease from all other surfaces and close door.
m.
4-19
