TM 5-6675-323-14
e.
Using dynamometer, push cable at midpoint until it just touches rear
track edge.
f. Rotate related cable tension adjustment with a 5/32 in. hex head key
wrench (to right tightens cable) to obtain gage reading of 325 25 g.
Adjustment is located in access hole.
A f t e r each adjustment, manually move pen arm (X-cable adjustment) or
g.
pen carriage (Y-cable adjustment) through its respective range of
travel several times.
Then recheck cable tension.
h.
Reassemble
plotter.
3-258
