TM 5-6675-323-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES--Cont.
(Number) -Hundreds of Hours
AN--Annually
B--Before
W--Weekly
M--Monthly
S --Semiannually
D--During
BI --Biennially
A--After
Q --Quarterly
For Readiness
ITEM TO BE INSPECTED
Reporting,
Equipment is
lN-
Not Ready/
PROCEDURE
TER-
ITEM
Available If:
NO.
VAL
VAN BODY--Cont
1
Inspect Exterior--Cont
NOTE
When mounted on trailer chassis, perform the following steps:
Lock disengaged
B/D/A
10. Inspect front and rear van body locks to be sure locks are fully
engaged.
11.
Inspect gaskets on personnel doors for leaks or damage
Q
Missing hinge
W
11.1 Inspect hinges for proper placement of hinge pins.
pins.
Q
12. Clean and paint blistered, pitted, or flaking areas and bare metal
spots in accordance with instructions contained in TM 43-0139,
Painting Instructions for Field Use.
2
Inspect Interior.
I
Emergency lights
B/D
1.
Test emergency lights by pressing test button.
do not light.
W
Inspect power cords and cables to be sure wires are not kinked,
2.
Wires or cables
cut, or cracked.
are cracked or cut
W
Inspect plug connectors to be sure all plug connectors are tight
3.
and firmly seated. Tighten if necessary.
D
Inspect for burned out light bulbs and fluorescent lamps. Replace
4.
as required.
W
Inspect walls, ceiling, and floor for holes, open seams, or signs of
5.
Leaks are present
seepage or leaks.
1-19
Change 2
