TM 5-6675-321-14
8-13. SERVICE UPON RECEIPT.
8-13.1 Checking Unpacked Equipment.
a. Inspect the equipment for damage incurred during shipment. If equipment has
been damaged, report the damage on DD Form 6, Packing Improvement Report.
b. Check the equipment against the packing list to see if the shipment is
complete. eport all discrepancies in accordance with the instructions of DA Pam
738-750.
c .
Check to see whether the equipment has been modified.
8-14. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES. There are
no organizational PMCS procedures assigned for this equipment.
8-15. ORGANIZATIONAL TROUBLESHOOTING PROCEDURES. If the magnifier lamp does
not power up when turned on, verify that 120 V ac is present at the receptacle. If
voltage is not present, plug equipment into receptacle with power available and
proceed with equipment troubleshooting. Perform no-power procedure for dead re-
ceptacle (Table 1-4). If voltage is present, replace magnifier lamp assembly (para-
graph 8-16.1).
8-16. MAINTENANCE PROCEDURES.
This section contains instructions covering organizational maintenance
functions for the support items. Personnel required are listed only if the task
requires more than one.
b. After completing each maintenance procedure, perform operational check to be
sure that equipment is properly functioning .
INDEX
PROCEDURE
PARAGRAPH
Replace
Magnifier
Lamp
Assembly
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-16.1
8-18
a .
