TM 5-6675-321-14
g.
Desolder leads from resistor.
NOTE
Be careful not to damage insulation or resistor mounting stud .
h.
Remove nut, washer, and defective resistor.
i .
Install new resistor and secure with washer and nut.
j .
Solder leads in same manner as original resistor.
k. Check continuity through resistor at terminal blocks 1 and 3.
l .
R e i n s t a l l i n n e r p a n e l.
m.
Reinstall top deck cover and top roller cover.
4-57
