TM 5-6675-320-14
Table 1-1. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES—Cont.
B—Before
W—Weekly
AN—Annually
(Number) - Hundreds of Hours
D—During
M—Monthly
S –Semiannually
A—After
Q —Quarterly
BI —Biennially
ITEM
NO.
1
2
lN-
TER-
VAL
B/D/A
Q
W
Q
B/D
W
W
D
ITEM TO BE INSPECTED
PROCEDURE
VAN BODY - Cont
Inspect Exterior - Cont
10.
11.
11.1
12.
NOTE
When mounted on trailer chassis, perform the following steps:
Inspect front and rear van body locks to be sure locks are fully
engaged.
Inspect gaskets on personnel doors for leaks or damage.
Inspect hinges for proper placement of hinge pins.
Clean and paint blistered, pitted, or flaking areas and bare metal
spots in accordance with instructions contained in TM 43-0139,
Painting Instructions for Field Use.
Inspect Interior.
1.
2.
3.
4.
Test emergency lights by pressing test button.
Inspect power cords and cables to be sure wires are not kinked,
cut, or cracked.
Inspect plug connectors to be sure all plug connectors are tight
and firmly seated. Tighten if necessary.
Inspect for burned out light bulbs and fluorescent lamps. Replace
as required.
For Readiness
Reporting,
Equipment Is
Not Ready/
Available If:
Lock disengaged.
Missing hinge
pins.
Emergency Iights
do not light.
Wires or cables
are cracked or cut.
Change 2
1-19
