TM 5-6675-319-14
(3) Remove screws and cover.
(4) Remove screws and pull APL counter straight out.
WARNING
Ground and discharge capacitor before disconnecting. Personal injury
may occur from failure to do so.
( 5)
( 6)
( 7)
Using insulated screwdriver, ground capacitor by touching screw-
driver shaft against housing post 8 and machine frame.
Tag and disconnect wiring from housing post 4, 6, 7, and 8.
Remove nuts, bolts, washers, and APL counter housing.
(8) Remove nut securing relay to plate and remove relay.
(9) Tag and desolder wiring from defective relay.
(10) Solder wiring to new relay, install and secure with nut.
(11) Reinstall APL counter housing and secure with bolts, washers, and
n u t s,
(12) Reconnect wiring to APL counter housing.
(13) Reinstall APL counter and secure with screws.
9-95
