TM 5-6675-319-14
d. Remove thermostat cover.
e.
Remove electrical junction box cover.
f. Tag and disconnect wiring from switch.
g .
Remove screws, nuts, and defective thermostat.
CAUTION
Sensing tube is spring loaded. Use care in removing bulb or equipment
damage may occur.
h. Remove tube and sensing assembly.
i .
Reinstall sensing tube on new thermostat.
j. Install new thermostat and secure with retaining screws and nuts.
k. Reconnect wiring to switch.
l .
R e i n s t a l l e l e c t r i c a l j u n c t i o n b o x c o v e r .
m. Calibrate new thermostat (paragraph 3-16.1) .
3 - 3 3
