TM 5-6675-318-14
Table 4-21. CODE DESCRIPTIONS - Cont
Code 27, Display and/or Enter Site Parameters
Enter code 27 to display or enter site parameters 1 through 4. Site parameters are
user-defined and can be used to record conditions at the site (for example, the
distance and direction between the antenna and benchmark). A code number to
identify the terrain may be used. Site parameters, although not used in the
computations, are recorded on tape. The range of values for each of the site
parameters is between 0 and 16,383. Changing the displayed value creates a new site
r e c o r d.
Code 33, Display Computed Elevation/Geoidal Height
Enter code 33 to select the position for which to display the computed elevation and
geoidal height in the satellite datum. Press the +/- key to select the desired
position as shown by the display. Selectable positions are 2D, 3D, TRANS-
LOCATION, INPUT, REFERENCE, CONTROL, DR, and WAYPOINT. Then press the enter
(E) key.
2D Position Selected
4-120
