TM 5-6675-318-14
Table 3-19. OPERATOR PREVENTIVE MAINTENANCE CHECKS AND SERVICES - Cont
AN - Annuallv
(Number) - Hundreds of Hours
W - Weekly
B - Before
S - Semiannually
M - Monthlv
D - During
B1 - Biennially
Q - Quarterly
After
A
For Readiness
ITEM TO BE INSPECTED
Reporting,
IN-
ITEM
Equipment Is
TER
PROCEDURE
NO.
Not Ready/
VAL
Available If:
GRAPHICS PLOTTER - Cont
W
Clean Plotter.
2
1.
T u r n LINE power switch off (0) and remove
power cord from wall outlet.
R e m o v e dust accumulation from surfaces of plotter
2.
with soft-haired artist's brush.
3.
Dampen cheesecloth with a 50-50 solution of
denatured alcohol and water. Wring out excess.
WARNING
Death or serious injury may occur from
electrical shock if plotter is energized
with platen wet.
4. Clean platen thoroughly with clean, damp cloth.
5 . Wipe away any moisture from platen surface with dry
cloth.
Allow plotter to dry before use.
3-153
