TM 5-6675-317-14
7-16.2 Replace Door Latch (Wall Storage Cabinet).
MOS :
41B, Topographic Instrument Repair Specialist
83FJ6, Reproduction Equipment Repairer
TOOLS: 9/16 in. Combination Wrench
Flat Tip Screwdriver
SUPPLIES:
Handle Type Latch
a. Remove holding plate retaining nut.
b.
Remove holding plate and latch rods.
c. Remove side latch plate.
d.
Remove handle retaining nut.
e. Loosen setscrew and remove bushing
f. Remove two handle retaining screws
g.
Install new handle and secure with
from handle shaft.
and remove handle.
screws.
h.
Reinstall
i. Reinstall
j.
Reinstall
k.
Reinstall
l.
Reinstall
bushing on handle shaft and tighten setscrew.
handle retaining nut.
side latch plate.
latch rod holding plate and latch rods.
holding plate retaining nut.
7-6
