TM 5-6675-317-14
d.
Remove screws from cover on underside of crosspiece assembly. Move
cover to allow access to pilot light.
e. Tag and disconnect wires from pilot light.
f. Remove retaining clip.
Remove defective pilot light.
9“
Position new pilot light through hole on crosspiece assembly.
h.
Reinstall retaining clip.
i.
Connect wires to pilot light.
j.
Reinstall cover on crosspiece assembly and secure with screws.
k.
Reinstall fuses and fuse caps.
l.
Plug in below-stage illuminator cord.
m.
Plug in power cord and turn power on.
4-39
