TM 5-6675-317-14
WARNING
Death or serious injury may occur from electrical shock unless power cord
is unplugged before servicing.
a.
Turn off power switch.
b.
Unplug power cord.
c.
Unplug below-stage illuminator cord.
d.
Remove fuse caps and fuses.
e.
Remove screws from cover on underside of
cover to allow access to power switch.
f.
Remove locknut and washer securing power
g.
Remove power switch through underside of
h.
Tag and disconnect wires from defective power switch.
crosspiece assembly. Move
switch to control panel.
crosspiece assembly.
i. Connect wires to new power switch and remove labels.
j.
Position power switch in crosspiece assembly.
k.
Reinstall
1.
Reinstall
m.
Reinstall
n.
Plug in below-stage illuminator cord.
o. Plug in power cord.
washer and locknut securing power switch to control panel.
cover on underside of crosspiece assembly.
fuses and fuse caps.
p.
Turn power on.
4-37
