TM 5-6675-317-14
b.
Remove bolts, washers, and nuts securing damaged mounting brackets to
ladder.
c.
Remove damaged cable assembly from ladder by drilling out rivet.
d.
Reinstall or install new mounting brackets. Secure with bolts,
washers, and nuts.
e.
Rivet new cable assembly to ladder.
NOTE
Be sure ladder mounting brackets fit section on rear door and under
personnel doors.
f.
Reinstall ladder on mounting bracket.
1-17. PREPARATION FOR STORAGE OR SHIPMENT.
a.
Van body may be stored or shipped either mounted on trailer chassis or
unmounted.
Preparation of trailer chassis is covered in TM 5-2330-305-14 and should
be referred to when trailer-mounted section is prepared for storage and shipment.
TM 5-4120-367-14 must be reviewed for instructions covering air conditioner/heater.
b.
Inventory equipment and consumable supplies against Hand Receipt Manual to be
sure all accountable material is contained in section.
Remove consumable supplies
that have limited shelf life or broken seals.
Replace missing items and be sure
that all remaining consumable supplies are at authorized levels. Be sure all major
components are operational.
c.
Remove all unauthorized or personal equipment from section.
d.
Move all classified material or sensitive data to proper storage. Complete
all accountability and/or transfer of documents.
e.
Refer to Preparation for Movement (paragraph 1-6.2) and follow applicable
steps and any additional steps directed by area authorities.
1-87
