TM 5-6675-316-14
12-13. SERVICE UPON RECEIPT.
12-13.1 Chec king Unpacked Equipment.
Inspect the equipment for damage incurred during shipment. If equipment has
been damaged, report the damage on DD Form 6, Packing Improvement Report.
b. Check the equipment against the packing list to see if the shipment is
complete.
Report all discrepancies in accordance with the instructions of DA Pam
738-750.
c. Check to see whether the equipment has been modified.
12-14. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES. There are
no organizational PMCS procedures assigned for this equipment.
12-15. ORGANIZATIONAL TROUBLESHOOTING PROCEDURES.
Organizational troubleshooting procedures cover the most common malfunctions
that may be repaired at the organizational level.
Repair or adjustment requiring
specialized equipment is not authorized unless such equipment is available.
Troubleshooting procedures used by lower level maintenance should be conducted in
addition to the organizational troubleshooting procedures.
b. This manual cannot list all the possible malfunctions or every possible
test/inspection and corrective action.
If a malfunction is not listed or corrected
by a listed corrective action, notify your supervisor.
c. If the support item does not power up when turned on, verify that 120 V ac is
present at the receptacle.
If voltage is not present, plug equipment into recepta-
cle with power available and proceed with equipment troubleshooting. Perform no-
power procedure for dead receptacle (Table 1-4).
12-24
